/*!*
 *
 *  Copyright (c) Highsoft AS. All rights reserved.
 *
 *!*/
import * as Highcharts from "../highcharts";
declare module "../highcharts" {
    /**
     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
     * animation when a series is displayed for the `dataLabels`. The animation
     * can also be set as a configuration object. Please note that this option
     * only applies to the initial animation.
     *
     * For other animations, see chart.animation and the animation parameter
     * under the API methods. The following properties are supported:
     *
     * - `defer`: The animation delay time in milliseconds.
     */
    interface PlotKlingerDataLabelsAnimationOptions {
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
         * milliseconds. Set to `0` to render the data labels immediately. As
         * `undefined` inherits defer time from the series.animation.defer.
         */
        defer?: number;
    }
    /**
     * (Highcharts, Highstock) Options for the series data sorting.
     */
    interface PlotKlingerDataSortingOptions {
        /**
         * (Highcharts, Highstock) Enable or disable data sorting for the
         * series. Use xAxis.reversed to change the sorting order.
         */
        enabled?: boolean;
        /**
         * (Highcharts, Highstock) Whether to allow matching points by name in
         * an update. If this option is disabled, points will be matched by
         * order.
         */
        matchByName?: boolean;
        /**
         * (Highcharts, Highstock) Determines what data value should be used to
         * sort by.
         */
        sortKey?: string;
    }
    /**
     * (Highstock) Options for the _Series on point_ feature. Only `pie` and
     * `sunburst` series are supported at this moment.
     */
    interface PlotKlingerOnPointOptions {
        /**
         * (Highstock) Options for the connector in the _Series on point_
         * feature.
         *
         * In styled mode, the connector can be styled with the
         * `.highcharts-connector-seriesonpoint` class name.
         */
        connectorOptions?: (Highcharts.PlotKlingerOnPointConnectorOptions|Highcharts.SVGAttributes);
        /**
         * (Highstock) The `id` of the point that we connect the series to. Only
         * points with a given `plotX` and `plotY` values and map points are
         * valid.
         */
        id?: string;
        /**
         * (Highstock) Options allowing to set a position and an offset of the
         * series in the _Series on point_ feature.
         */
        position?: (object|Highcharts.PlotKlingerOnPointPositionOptions);
    }
    /**
     * (Highstock) Klinger oscillator. This series requires the `linkedTo`
     * option to be set and should be loaded after the
     * `stock/indicators/indicators.js` file.
     *
     * Configuration options for the series are given in three levels:
     *
     * 1. Options for all series in a chart are defined in the
     * plotOptions.series object.
     *
     * 2. Options for all `klinger` series are defined in plotOptions.klinger.
     *
     * 3. Options for one single series are given in the series instance array.
     * (see online documentation for example)
     *
     * **TypeScript:**
     *
     * - the type option must always be set.
     *
     * - when accessing an array of series, the combined set of all series types
     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
     * specific type can be done by checking the `type` property. (see online
     * documentation for example)
     */
    interface PlotKlingerOptions {
        /**
         * (Highstock) Accessibility options for a series.
         */
        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
        /**
         * (Highstock) Allow this series' points to be selected by clicking on
         * the graphic (columns, point markers, pie slices, map areas etc).
         *
         * The selected points can be handled by point select and unselect
         * events, or collectively by the getSelectedPoints function.
         *
         * And alternative way of selecting points is through dragging.
         */
        allowPointSelect?: boolean;
        /**
         * (Highstock) Enable or disable the initial animation when a series is
         * displayed. The animation can also be set as a configuration object.
         * Please note that this option only applies to the initial animation of
         * the series itself. For other animations, see chart.animation and the
         * animation parameter under the API methods. The following properties
         * are supported:
         *
         * - `defer`: The animation delay time in milliseconds.
         *
         * - `duration`: The duration of the animation in milliseconds.
         * (Defaults to `1000`)
         *
         * - `easing`: Can be a string reference to an easing function set on
         * the `Math` object or a function. See the _Custom easing function_
         * demo below. (Defaults to `easeInOutSine`)
         *
         * Due to poor performance, animation is disabled in old IE browsers for
         * several chart types.
         */
        animation?: (boolean|Highcharts.AnimationOptionsObject);
        /**
         * (Highstock) For some series, there is a limit that shuts down
         * animation by default when the total number of points in the chart is
         * too high. For example, for a column chart and its derivatives,
         * animation does not run if there is more than 250 points totally. To
         * disable this cap, set `animationLimit` to `Infinity`. This option
         * works if animation is fired on individual points, not on a group of
         * points like e.g. during the initial animation.
         */
        animationLimit?: number;
        /**
         * (Highstock) Sets the color blending in the boost module.
         */
        boostBlending?: Highcharts.OptionsBoostBlendingValue;
        /**
         * (Highstock) Set the point threshold for when a series should enter
         * boost mode.
         *
         * Setting it to e.g. 2000 will cause the series to enter boost mode
         * when there are 2000 or more points in the series.
         *
         * To disable boosting on the series, set the `boostThreshold` to 0.
         * Setting it to 1 will force boosting.
         *
         * Note that the cropThreshold also affects this setting. When zooming
         * in on a series that has fewer points than the `cropThreshold`, all
         * points are rendered although outside the visible plot area, and the
         * `boostThreshold` won't take effect.
         */
        boostThreshold?: number;
        /**
         * (Highstock) An additional class name to apply to the series'
         * graphical elements. This option does not replace default class names
         * of the graphical element. Changes to the series' color will also be
         * reflected in a chart's legend and tooltip.
         */
        className?: string;
        /**
         * (Highstock) Disable this option to allow series rendering in the
         * whole plotting area.
         *
         * **Note:** Clipping should be always enabled when chart.zoomType is
         * set
         */
        clip?: boolean;
        /**
         * (Highstock) The main color of the series. In line type series it
         * applies to the line and the point markers unless otherwise specified.
         * In bar type series it applies to the bars unless a color is specified
         * per point. The default value is pulled from the `options.colors`
         * array.
         *
         * In styled mode, the color can be defined by the colorIndex option.
         * Also, the series color can be set with the `.highcharts-series`,
         * `.highcharts-color-{n}`, `.highcharts-{type}-series` or
         * `.highcharts-series-{n}` class, or individual classes given by the
         * `className` option.
         */
        color?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject);
        /**
         * (Highstock) Styled mode only. A specific color index to use for the
         * series, so its graphic representations are given the class name
         * `highcharts-color-{n}`.
         *
         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
         * changing the color scheme very convenient.
         */
        colorIndex?: number;
        /**
         * (Highcharts, Highstock, Highmaps) Determines what data value should
         * be used to calculate point color if `colorAxis` is used. Requires to
         * set `min` and `max` if some custom point property is used or if
         * approximation for data grouping is set to `'sum'`.
         */
        colorKey?: string;
        /**
         * (Highstock) Compare the values of the series against the first
         * non-null, non- zero value in the visible range. The y axis will show
         * percentage or absolute change depending on whether `compare` is set
         * to `"percent"` or `"value"`. When this is applied to multiple series,
         * it allows comparing the development of the series against each other.
         * Adds a `change` field to every point object.
         */
        compare?: Highcharts.OptionsCompareValue;
        /**
         * (Highstock) When compare is `percent`, this option dictates whether
         * to use 0 or 100 as the base of comparison.
         */
        compareBase?: (0|100);
        /**
         * (Highstock) Defines if comparison should start from the first point
         * within the visible range or should start from the last point
         * **before** the range.
         *
         * In other words, this flag determines if first point within the
         * visible range will have 0% (`compareStart=true`) or should have been
         * already calculated according to the previous point
         * (`compareStart=false`).
         */
        compareStart?: boolean;
        /**
         * (Highstock) Whether to compare indicator to the main series values or
         * indicator values.
         */
        compareToMain?: boolean;
        /**
         * (Highcharts, Highstock) Whether to connect a graph line across null
         * points, or render a gap between the two points on either side of the
         * null.
         *
         * In stacked area chart, if `connectNulls` is set to true, null points
         * are interpreted as 0.
         */
        connectNulls?: boolean;
        /**
         * (Highcharts, Highstock, Gantt) When true, each point or column edge
         * is rounded to its nearest pixel in order to render sharp on screen.
         * In some cases, when there are a lot of densely packed columns, this
         * leads to visible difference in column widths or distance between
         * columns. In these cases, setting `crisp` to `false` may look better,
         * even though each column is rendered blurry.
         */
        crisp?: boolean;
        /**
         * (Highcharts, Highstock) When the series contains less points than the
         * crop threshold, all points are drawn, even if the points fall outside
         * the visible plot area at the current zoom. The advantage of drawing
         * all points (including markers and columns), is that animation is
         * performed on updates. On the other hand, when the series contains
         * more points than the crop threshold, the series data is cropped to
         * only contain points that fall within the plot area. The advantage of
         * cropping away invisible points is to increase performance on large
         * series.
         */
        cropThreshold?: number;
        /**
         * (Highstock) Cumulative Sum feature replaces points' values with the
         * following formula: `sum of all previous points' values + current
         * point's value`. Works only for points in a visible range. Adds the
         * `cumulativeSum` field to each point object that can be accessed e.g.
         * in the tooltip.pointFormat.
         *
         * With `dataGrouping` enabled, default grouping approximation is set to
         * `sum`.
         */
        cumulative?: boolean;
        /**
         * (Highstock) Defines if cumulation should start from the first point
         * within the visible range or should start from the last point
         * **before** the range.
         *
         * In other words, this flag determines if first point within the
         * visible range will start at 0 (`cumulativeStart=true`) or should have
         * been already calculated according to the previous point
         * (`cumulativeStart=false`).
         */
        cumulativeStart?: boolean;
        /**
         * (Highstock) You can set the cursor to "pointer" if you have click
         * events attached to the series, to signal to the user that the points
         * and lines can be clicked.
         *
         * In styled mode, the series cursor can be set with the same classes as
         * listed under series.color.
         */
        cursor?: (string|Highcharts.CursorValue);
        /**
         * (Highstock) A reserved subspace to store options and values for
         * customized functionality. Here you can add additional data for your
         * own event callbacks and formatter callbacks.
         */
        custom?: Highcharts.Dictionary<any>;
        /**
         * (Highstock) Name of the dash style to use for the graph, or for some
         * series types the outline of each shape.
         *
         * In styled mode, the stroke dash-array can be set with the same
         * classes as listed under series.color.
         */
        dashStyle?: Highcharts.DashStyleValue;
        /**
         * (Highstock) Data grouping is the concept of sampling the data values
         * into larger blocks in order to ease readability and increase
         * performance of the JavaScript charts. Highcharts Stock by default
         * applies data grouping when the points become closer than a certain
         * pixel value, determined by the `groupPixelWidth` option.
         *
         * If data grouping is applied, the grouping information of grouped
         * points can be read from the Point.dataGroup. If point options other
         * than the data itself are set, for example `name` or `color` or custom
         * properties, the grouping logic doesn't know how to group it. In this
         * case the options of the first point instance are copied over to the
         * group point. This can be altered through a custom `approximation`
         * callback function.
         */
        dataGrouping?: Highcharts.DataGroupingOptionsObject;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
         * labels, appearing next to each data point.
         *
         * Since v6.2.0, multiple data labels can be applied to each single
         * point by defining them as an array of configs.
         *
         * In styled mode, the data labels can be styled with the
         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
         * (see example).
         */
        dataLabels?: (Highcharts.PlotKlingerDataLabelsOptions|Array<Highcharts.PlotKlingerDataLabelsOptions>);
        /**
         * (Highcharts, Highstock) Options for the series data sorting.
         */
        dataSorting?: (Highcharts.DataSortingOptionsObject|Highcharts.PlotKlingerDataSortingOptions);
        /**
         * (Highstock) A description of the series to add to the screen reader
         * information about the series.
         */
        description?: string;
        /**
         * (Highstock) Enable or disable the mouse tracking for a specific
         * series. This includes point tooltips and click events on graphs and
         * points. For large datasets it improves performance.
         */
        enableMouseTracking?: boolean;
        /**
         * (Highstock) General event handlers for the series items. These event
         * hooks can also be attached to the series at run time using the
         * `Highcharts.addEvent` function.
         */
        events?: Highcharts.SeriesEventsOptionsObject;
        /**
         * (Highstock) Determines whether the series should look for the nearest
         * point in both dimensions or just the x-dimension when hovering the
         * series. Defaults to `'xy'` for scatter series and `'x'` for most
         * other series. If the data has duplicate x-values, it is recommended
         * to set this to `'xy'` to allow hovering over all points.
         *
         * Applies only to series types using nearest neighbor search (not
         * direct hover) for tooltip.
         */
        findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
        /**
         * (Highstock) Defines when to display a gap in the graph, together with
         * the gapUnit option.
         *
         * In case when `dataGrouping` is enabled, points can be grouped into a
         * larger time span. This can make the grouped points to have a greater
         * distance than the absolute value of `gapSize` property, which will
         * result in disappearing graph completely. To prevent this situation
         * the mentioned distance between grouped points is used instead of
         * previously defined `gapSize`.
         *
         * In practice, this option is most often used to visualize gaps in time
         * series. In a stock chart, intraday data is available for daytime
         * hours, while gaps will appear in nights and weekends.
         */
        gapSize?: number;
        /**
         * (Highstock) Together with gapSize, this option defines where to draw
         * gaps in the graph.
         *
         * When the `gapUnit` is `"relative"` (default), a gap size of 5 means
         * that if the distance between two points is greater than 5 times that
         * of the two closest points, the graph will be broken.
         *
         * When the `gapUnit` is `"value"`, the gap is based on absolute axis
         * values, which on a datetime axis is milliseconds. This also applies
         * to the navigator series that inherits gap options from the base
         * series.
         */
        gapUnit?: Highcharts.OptionsGapUnitValue;
        /**
         * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the
         * total chart width or only the zoomed area when zooming in on parts of
         * the X axis. By default, the Y axis adjusts to the min and max of the
         * visible data. Cartesian series only.
         */
        getExtremesFromAll?: boolean;
        /**
         * (Highstock) Highlight only the hovered point and fade the remaining
         * points.
         *
         * Scatter-type series require enabling the 'inactive' marker state and
         * adjusting opacity. Note that this approach could affect performance
         * with large datasets.
         */
        inactiveOtherPoints?: boolean;
        /**
         * (Highstock) When set to `false` will prevent the series data from
         * being included in any form of data export.
         *
         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
         * as `includeInCSVExport`.
         */
        includeInDataExport?: boolean;
        /**
         * (Highcharts, Highstock, Gantt) Series labels are placed as close to
         * the series as possible in a natural way, seeking to avoid other
         * series. The goal of this feature is to make the chart more easily
         * readable, like if a human designer placed the labels in the optimal
         * position.
         *
         * The series labels currently work with series types having a `graph`
         * or an `area`.
         */
        label?: Highcharts.SeriesLabelOptionsObject;
        /**
         * (Highstock) The line marks the last price from all points.
         */
        lastPrice?: Highcharts.SeriesLastPriceOptionsObject;
        /**
         * (Highstock) The line marks the last price from visible range of
         * points.
         */
        lastVisiblePrice?: Highcharts.SeriesLastVisiblePriceOptionsObject;
        /**
         * (Highstock) What type of legend symbol to render for this series. Can
         * be one of `areaMarker`, `lineMarker` or `rectangle`.
         */
        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
        /**
         * (Highcharts, Highstock) The SVG value used for the `stroke-linecap`
         * and `stroke-linejoin` of a line graph. Round means that lines are
         * rounded in the ends and bends.
         */
        linecap?: Highcharts.SeriesLinecapValue;
        /**
         * (Highcharts, Highstock) Pixel width of the graph line.
         */
        lineWidth?: number;
        /**
         * (Highcharts, Highstock, Gantt) The main series ID that indicator will
         * be based on. Required for this indicator.
         */
        linkedTo?: string;
        /**
         * (Highstock) Options for the point markers of line and scatter-like
         * series. Properties like `fillColor`, `lineColor` and `lineWidth`
         * define the visual appearance of the markers. The `symbol` option
         * defines the shape. Other series types, like column series, don't have
         * markers, but have visual options on the series level instead.
         *
         * In styled mode, the markers can be styled with the
         * `.highcharts-point`, `.highcharts-point-hover` and
         * `.highcharts-point-select` class names.
         */
        marker?: Highcharts.PointMarkerOptionsObject;
        /**
         * (Highstock) The name of the series as shown in the legend, tooltip
         * etc. If not set, it will be based on a technical indicator type and
         * default params.
         */
        name?: string;
        /**
         * (Highstock) The color for the parts of the graph or points that are
         * below the threshold. Note that `zones` takes precedence over the
         * negative color. Using `negativeColor` is equivalent to applying a
         * zone with value of 0.
         */
        negativeColor?: (Highcharts.ColorString|Highcharts.GradientColorObject|Highcharts.PatternObject);
        /**
         * (Highstock) Options for the _Series on point_ feature. Only `pie` and
         * `sunburst` series are supported at this moment.
         */
        onPoint?: (object|Highcharts.PlotKlingerOnPointOptions);
        /**
         * (Highstock) Opacity of a series parts: line, fill (e.g. area) and
         * dataLabels.
         */
        opacity?: number;
        /**
         * (Highstock) Parameters used in calculation of Klinger Oscillator.
         */
        params?: Highcharts.PlotKlingerParamsOptions;
        /**
         * (Highstock) Properties for each single point.
         */
        point?: Highcharts.PlotSeriesPointOptions;
        /**
         * (Highstock) Same as accessibility.point.descriptionFormat, but for an
         * individual series. Overrides the chart wide configuration.
         */
        pointDescriptionFormat?: Function;
        /**
         * (Highstock) Same as accessibility.series.descriptionFormatter, but
         * for an individual series. Overrides the chart wide configuration.
         */
        pointDescriptionFormatter?: Function;
        /**
         * (Highcharts, Highstock) When true, X values in the data set are
         * relative to the current `pointStart`, `pointInterval` and
         * `pointIntervalUnit` settings. This allows compression of the data for
         * datasets with irregular X values.
         *
         * The real X values are computed on the formula `f(x) = ax + b`, where
         * `a` is the `pointInterval` (optionally with a time unit given by
         * `pointIntervalUnit`), and `b` is the `pointStart`.
         */
        relativeXValue?: boolean;
        /**
         * (Highstock) Whether to select the series initially. If `showCheckbox`
         * is true, the checkbox next to the series name in the legend will be
         * checked for a selected series.
         */
        selected?: boolean;
        /**
         * (Highstock) Whether to apply a drop shadow to the graph line. Since
         * 2.3 the shadow can be an object configuration containing `color`,
         * `offsetX`, `offsetY`, `opacity` and `width`.
         *
         * Note that in some cases, like stacked columns or other dense layouts,
         * the series may cast shadows on each other. In that case, the
         * `chart.seriesGroupShadow` allows applying a common drop shadow to the
         * whole series group.
         */
        shadow?: (boolean|Highcharts.ShadowOptionsObject);
        /**
         * (Highstock) If true, a checkbox is displayed next to the legend item
         * to allow selecting the series. The state of the checkbox is
         * determined by the `selected` option.
         */
        showCheckbox?: boolean;
        /**
         * (Highstock) Whether to display this particular series or series type
         * in the legend. Standalone series are shown in legend by default, and
         * linked series are not. Since v7.2.0 it is possible to show series
         * that use colorAxis by setting this option to `true`.
         */
        showInLegend?: boolean;
        signalLine?: Highcharts.PlotKlingerSignalLineOptions;
        /**
         * (Highstock) If set to `true`, the accessibility module will skip past
         * the points in this series for keyboard navigation.
         */
        skipKeyboardNavigation?: boolean;
        /**
         * (Highcharts, Highstock) When this is true, the series will not cause
         * the Y axis to cross the zero plane (or threshold option) unless the
         * data actually crosses the plane.
         *
         * For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3
         * will make the Y axis show negative values according to the
         * `minPadding` option. If `softThreshold` is `true`, the Y axis starts
         * at 0.
         */
        softThreshold?: boolean;
        /**
         * (Highstock) Sonification/audio chart options for a series.
         */
        sonification?: Highcharts.SeriesSonificationOptions;
        states?: Highcharts.SeriesStatesOptionsObject;
        /**
         * (Highcharts, Highstock) Whether to apply steps to the line. Possible
         * values are `left`, `center` and `right`.
         */
        step?: Highcharts.OptionsStepValue;
        /**
         * (Highstock) Sticky tracking of mouse events. When true, the
         * `mouseOut` event on a series isn't triggered until the mouse moves
         * over another series, or out of the plot area. When false, the
         * `mouseOut` event on a series is triggered when the mouse leaves the
         * area around the series' graph or markers. This also implies the
         * tooltip when not shared. When `stickyTracking` is false and
         * `tooltip.shared` is false, the tooltip will be hidden when moving the
         * mouse between series. Defaults to true for line and area type series,
         * but to false for columns, pies etc.
         *
         * **Note:** The boost module will force this option because of
         * technical limitations.
         */
        stickyTracking?: boolean;
        /**
         * (Highcharts, Highstock) The threshold, also called zero level or base
         * level. For line type series this is only used in conjunction with
         * negativeColor.
         */
        threshold?: (number|null);
        /**
         * (Highstock) A configuration object for the tooltip rendering of each
         * single series. Properties are inherited from tooltip, but only the
         * following properties can be defined on a series level.
         */
        tooltip?: Highcharts.SeriesTooltipOptionsObject;
        /**
         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
         * that is longer than this, the Series class looks for data
         * configurations of plain numbers or arrays of numbers. The first and
         * last valid points are checked. If found, the rest of the data is
         * assumed to be the same. This saves expensive data checking and
         * indexing in long series, and makes data-heavy charts render faster.
         *
         * Set it to `0` disable.
         *
         * Note:
         *
         * - In boost mode turbo threshold is forced. Only array of numbers or
         * two dimensional arrays are allowed.
         *
         * - In version 11.4.3 and earlier, if object configurations were passed
         * beyond the turbo threshold, a warning was logged in the console and
         * the data series didn't render.
         */
        turboThreshold?: number;
        /**
         * (Highstock) Set the initial visibility of the series.
         */
        visible?: boolean;
        /**
         * (Highcharts, Highstock) Defines the Axis on which the zones are
         * applied.
         */
        zoneAxis?: string;
        /**
         * (Highcharts, Highstock) An array defining zones within a series.
         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
         * according to the `zoneAxis` option. The zone definitions have to be
         * in ascending order regarding to the value.
         *
         * In styled mode, the color zones are styled with the
         * `.highcharts-zone-{n}` class, or custom classed from the `className`
         * option (view live demo).
         */
        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
    }
    interface PlotKlingerSignalLineOptions {
        /**
         * (Highstock) Styles for a signal line.
         */
        styles?: Highcharts.PlotKlingerSignalLineStylesOptions;
    }
}
